AUTOMATIC SPOKE NIPPLE FEEDER & DRIVER

- Pneumatic spoke nipple feeder and driver.

- For 14 and 15 guage, 14 or 16mm nipples.

- Spokes are feed into the driver.  A push of the tip will drive the nipple on the spoke.

- Comes with 10 driver bits with a 3mm pin for correct driving depth.

- For single-wall or double-wall rims of up to 8mm depth.

- Assembles up to 40 rims per hour with pre-laced hubs.

- Recommended using assemble table (part number 507-110) for ease of assembly.

- Air compressor is not included.  Operating PSI: 20-50 

OTHER FEATURES:

- Compressor oil flow controller

- Air flow controller

- Feeding speed can be adjusted

- Additional information is available here.

- Made in Taiwan